Controllers

Temperature Controller Model D-85 and D-85R

Controller, temperature. Model D-85

Controller type PID of great accuracy. Display for set and actual temperature
Temperature probe (110 mm. long x 5mm diameter 1 meter cord), provided
Size: 185 x 245 x 120 mm. Weight: 2Kg. Operate on 230V / 50-60 Hz. 2x5 Amp 2.000W

Controller, temperature / time. Model D-85R

Controller to program 4 ramps of 16 segments each, and permit  to select star and end time operation
Port RS485, for PC command and analogical port (0-20mA, 4-20mA, 0-10V,0-20V) for printer (optional)
Come with probe
Size: 185 x 245 x 120 mm. Weight: 2Kg. Operate 230V / 50-60 Hz. 2.000W

Specifications

CodeModelTemperature maximRange timePrecision
1.8102.00 D-85 399,9 ºC -- ± 0,1 ºC
1.8103.00 D-85R 400 ºC 99 hours 99min ± 0,5 ºC
1.8104.00 D-85R 1200 ºC 99 hours 99min ± 0,5 ºC
1.8300.01 Analogical card 0-20mA, 0-20V
1.8300.02 Card for RS485 port
Description - Accessories
1.8102.00D-85 - Controller,dig.temperature controller PID max 399.9ºC.Precision ±0.1ºC
1.8103.00D-85R - Controller,dig.temperature/time controller PID 400ºC/99hr,99min.
1.8104.00D-85R - Controller, dig.temperature/time controller PID 1200ºC/99 hr,99min.

Cyclic Time Controller

The controller enables automatic switching of small appliances to on or off (up 2000 watt)
Two controls for recurrent operations  that allow the programming operation and rest time
Memory EPROM, without battery and maintenance
Display LCD backlight
Range: 0.01 seconds to 99.9 hours or 999.9 hours according mode
Safety IP65
Come in housing with main switch, fuse, pilot lamps, main plug and auxiliary plug
Size: W180 x  D245 x H 120 mm /Weight: 2 Kg. Operation: 230V / 50-60 Hz 10 Amp 2000 W

Description
1.8119.00Timer, double cyclic digital control, from 0.01 seconds to 99.90 hours. 10 Amp

Vacuum Controller

Device for vacuum adjust
With vacuum gauge 0 - 760 mm. Hg
Increments 20 mm. Hg
Precision ± 2%
Code 1.9518.00

To see Vacuum Pumps D-95 chapter

Pressure Controller

Device to pressure control.
With pressure gauge 0-4bar (0,1bar)
Code 1.9518.01

To see Vacuum Pumps D-95 chapter

 

Description
1.9518.00Vacuum control device. Precision ± 2%
1.9518.01Pressure control device 0-4bar - 0,1bar

Vacuum Controller Model D-VCD

For precise control of vacuum pumps
The controller enables automatic switching of vacuum pumps to on or off
Two set point controls and vacuum units to select
Display of vacuum, LEDS of 11 mm height
Inlet of air. Auxiliary socket main
Operation: 230V 50/60Hz. 2x2Amp. Weight: 2 Kg. Size: 180 x 245 x 120 mm

Specifications
Scale measure: 0...-101.3 kPa / 0...-760 mm Hg / 0...1bar. In addition psi, in Hg.
Repeatability: ± 0.2% end of scale. Resolution: 0.1 kPa / 1 mm Hg/0,001 bar.
Operation temperature: 0...50ºC. Set point: 2, higher and lower limits
Relative humidity operation: 35...85%

Description
1.9518.10D-VCD - Digital vacuum controller. Range: 0...101.3 kPa/0.. 760 mm Hg.