Heaters Metallic Block

Heaters Model D-65

Heater unit of interchangeable heating metallic blocks with adjustable temperature. Designed for incubation and inactivation of cultures, enzyme reactions, melting and boiling points, nitrogen or COD
The electronic controller assures temperature uniformity and rapid heat up
Two digital readers, indicate the current temperature and the temperature set point
Housing of stainless steel

The model D-65 is given with warning digital chronometer while the model D-65T integrates an electronic
digital timer for the automatic stop and acoustic warning

Both models are manufactured for use up to 200ºC or 99.9ºC with ±0.5ºC and ±0.1ºC accuracy respectively
Includes threaded support rod enabling to remove blocks and safety-bell. Without blocks

The Heater D-65 ASTM include metallic block isolated for 6 Nessler tubes. Size holes of 20 mm diameter and 230 mm deep each. Additional hole for temperature probe Pt100. Temperature control to 300ºC. Precision ± 0.5ºC. Conform ASTM 3366-95

The Heater ASTM 2274 support four tubes of length 590mm x 20mm Ø to work up to 200ºC.
Requires Controller temperature mode D-85

Size / Weight

D-65 and D65T: 25x28x11cm. Weight: D-65,4Kg. /D-65T, 4.5Kg.
D-65 ASTM: 26x28x40cm. Weight: 20Kg.
ASTM 2274: 35x35x80cm. Weight: 35Kg.

Operation: 230V 50/60 Hz

Specifications

Heater D-65 ASTM

Code	Article	T. maxim	Precision ºC
1.8082.00	Heater D65	200 ºC	± 0,5
1.8082.10	Heater D65	99,9 ºC	± 0,1
1.8084.00	Heater D65T	200 ºC	± 0,5
1.8084.10	Heater D65T	99,9 ºC	± 0,1
1.8090.00	Heater D-65 ASTM	300ºC	± 0,5
1.8092.01	Heater ASTM 2274*	200ºC	± 0,1

*Require a D-85 Temperature Controller model

Description - Accessories

1.8082.00	D-65 - Heater block.Temperature digital control, max. 200ºC. Precision ± 1ºC. Without block
1.8082.10	D-65 - Heater block.Temperature digital control, max. 99.9ºC. Precision ± 0.1ºC. Without block
1.8084.00	D-65T - Heater block.Temperature / time digital control, max. 200ºC. Precision ±1ºC. Without block
1.8084.10	D-65T - Heater block.Temperature / time digital control, max. 99.9ºC. Precision ± 0.1ºC. Without block
1.8090.00	ASTM - Heater block. Temperature control, max. 300ºC. With block 6 Nessler tubes 20cm Ø
1.8092.01	Heater ASTM 2274
1.8085.00	Metallic block for 24 tubes 16mm. Ø
1.8085.01	Metallic block for 30 tubes of 13mm. Ø
1.8085.08	Metallic Block for 30 tubes of 12mm. Ø
1.8085.04	Metallic Block for 18 tubes of 20mm Ø
1.8083.00	Metallic block 6 tubes each, 13 - 16 and 20mm. Ø
1.8085.02	Metallic block for 30 Eppendorf tubes
1.8087.00	Metallic block virgin
1.8088.00	Threaded support rod to enabling to remove blocks
1.8089.00	Safety - bell

Heater Model D-64

Model D-64

Fixed metallic block for 12 tubes of 16mm diameter
Stainless steel housing

Digital control of temperature for current and programmed temperature

Supplied with safety-bell
Operation: 230V 50/60Hz.

Specifications

Code	T. maxim	Precision ºC	Size cm
1.8081.10	150ºC	± 0.5	21x17x15

Description - Accessories

1.8081.10	D-64D - Heater block for 12 tubes of 16 mm diameter. Temperature digital control, max. 150ºC.
1.8081.01	Safety-bell

Heater Block Model D-66

D-66

Metallic block incubator for 4 places of flasks, tubes, etc. of 40mm diameter
Deep holes, 60mm
Stainless steel made. PID temperature controller with digital reader
Available aluminium adapters for smaller containers than 40mm diameter

Weight: 3.8Kg.
Operation: 230V 50/60Hz 200W

Specifications

Code	T. maxim	Precision ºC	Size cm
1.8093.20	Room to 50	± 0.1	21x17x15

Description - Accessories

1.8093.20	D-66 - Heater block for 4 places of 40mm diameter. Temperature digital control, max. 50ºC.
1.8093.15	Aluminium adapters for containers of diameter below 40mm, to indicate diameter (to use with D-66AM)