Bombas Peristálticas Caudal Variable D25Vplus
Peristaltic Pumps Variable Flows Model D-25Vplus
Automatic cyclic dose with programming time of dosing and rest between 1 and 99 seconds
Auxiliary remote control by signal 0-10 V and 4-20 mA
Connector for foot switch ON/OFF
Display indicator
Full flow switch for charge o remove fluid
General switch ON/OFF
Many lot of pump heads and motors for flows from 0.02 to 6000 ml/minute
Metallic rotor of 3 rollers
Non-volatile memory
Ramp function, flow / time 0...99% / 1...99 minutes
Reverse flow
Speed control 0 to 99 % in 1% increments
Speed repeat accuracy 100 %
Tube is easily removed by user
Warning pilot lamps
Water proof key board
PUMP HEADS
Pump head 50-3r, 3 rollers, for medium and low flow. Transparent cover. Can load tubes to 6.4mm diameter.
Pump head CFV-4r, easy cahnge tube with 4 rollers for 0,5 tubes to 4,8mm. Motor from 15 to 240rpm
Pump head 153-3r, and CFV-4r (330rpm), for extreme easiness to remove tubes. The 153-3r can use tubes from 0,5 to to 8mm diameter and can load another auxiliary 153-3r pump head simultaneously.
The pump head CFV-4r(330rpm) can loa, maximum, 4 auxiliary pump head.
Pump head CF-4r of 4 rollers, extreme easiness to remove tubes. Can use tube from 0,5 to 6,4mm.
Pump head 253-3r, of 3 staintless steell rollers, for continuous work. Can load tubes from 6,4 to 9.6mm. of tickness wall 2,4mm
Pump head M4-10r of 4 channels with 4 bobines and 10 driver rollers.
Pump head M2-10r of 2 channels with 2 bobines and 10 driver rollers.
The pumps MC can load auxilliary MC pump heads with maximum 12 channels.
Each pump is supplied with a set of tubes
Size: L x D x H
Pumps with pump head 50-3r and CFV-4r:250 x 260 x 120 mm. Weight: 4.2 Kg
Pumps with pump head CF-4r, 153-3r / 253-3r / MC and CFV-4r with 330rpm motor: 340 x 280 x180 mm. Weight: 7 Kg.
Operate: 100...260 V 50/60 Hz.
Specifications - Flow Table
Orientative table flows - Regulation Intervals for each tube diameter
Código |
rpm |
Head |
0,5mm |
0,8mm |
1,6mm |
3,2mm |
4,0mm |
4,8mm |
6,4mm |
8,0mm |
9,6mm |
Tube Ø |
1.9731.15 |
15 |
CFV-4r |
0,02-0,30 |
0,05-0,80 |
0,2-3,0 |
0,8-12 |
1,25-18 |
1,5-25 |
No
|
Caudal ml/min |
||
1.9731.30 |
30 |
CFV-4r |
0,03-0,5 |
0,07-1,20 |
0,3-4,6 |
1,2-18 |
1,8-29 |
2,2-30 |
||||
1.9731.80 |
80 |
CFV-4r |
0,08-1,2 |
0,20-3,00 |
0,8-12 |
3,0-48 |
4,5-78 |
5,0-85 |
||||
1.9731.24 |
240 |
CFV-4r |
0,25-3,0 |
0,80-8,0 |
3,0-30 |
11-122 |
18-192 |
25-250 |
||||
1.9731.33 |
330 |
CFV-4r |
0,5-5,0 |
0,8-12,0 |
3,3-50 |
13-205 |
20-320 |
25-330 |
||||
1.9735.00 |
240 |
50-3r |
0,60-5,2 |
1,5-16 |
5,6-65 |
25-225 |
35-283 |
70-400 |
130-700 |
No |
||
1.9735.15 |
80 |
50-3r |
0,15-2,2 |
0,40-5,6 |
1,3-24 |
3,8-73 |
5,9-114 |
8,9-145 |
16-258 |
|||
1.9735.12 |
30 |
50-3r |
0,05-0,8 |
0,13-2,0 |
0,6-7,5 |
1,5-23 |
2,1-35 |
3,2-45 |
5,7-81 |
|||
1.9747.50● |
500 |
153-3r |
0,7-12 |
2-29 |
12-120 |
29-470 |
- |
80-1000 |
115-1500 |
250-2000 |
No |
|
1.9747.00 |
330 |
153-3r |
0,5-8,5 |
1,5-20 |
8,0-85 |
20-330 |
- |
56-700 |
80-1050 |
175-1300 |
No |
|
1.9747.11 |
110 |
153-3r |
0,17-2,8 |
0,5-6,7 |
2,7-28 |
6,7-100 |
- |
19-230 |
27-367 |
58-500 |
||
1.9747.40 |
330 |
CF-4r |
0,5-8,5 |
1,5-20 |
8,0-85 |
20-330 |
- |
56-700 |
80-1050 |
No |
||
1.9749.50● |
500 |
253-3r* |
No |
220-2700 |
320-4700 |
450-6000 |
||||||
1.9749.00 |
330 |
253-3r* |
No |
150-1850 |
200-2970 |
250-3300 |
||||||
1.9747.09 |
110 |
MC2 |
(1) |
|
||||||||
1.9747.08 |
110 |
MC4 |
(1) |
|
● Motor brushless - * For tickness wall tube-(1)To sse below flow table
Orientative table flows for each channel - Pump head type MC.
Inside diameter tube mm |
1,0 |
2,0 |
3,0(1) |
4,0 |
Minimum flow: ml / min |
0,8 |
2,5 |
4,0 |
5 |
Continuous máximum flow, ml/min |
8 |
25 |
40 |
50 |
Flows calculated with water in normal conditions without outlet back pressure.
1.9732.15 | D25Vplus-Variable flow, 0.1 to 20 ml/min, 15 rpm |
---|---|
1.9732.16 | D25Vplus.-Variable flow, 0.05 to 10 ml/min. Pump head CFG2-30r, 15 rpm |
1.9732.17 | D25Vplus-Variable flow, 5.0 to 565 ml/min. Pump head CFG1-3r, 300 rpm |
1.9732.18 | D25Vplus- Variable flow, 0.5 to 175 ml/min, 300 rpm. |
1.9731.30 | D25Vplus-Variable flow, pump head CFV-4r, 0,05 to 30 ml/min,30 rpm. |
1.9731.80 | D25Vplus-Variable flow, pump head CFV-4r,0,1 to 80 ml/min, 80 rpm. |
1.9731.24 | D25Vplus-Variable flow, pump head CFV-4r, 0,5 to 220 ml/min, 240 rpm. |
1.9731.33 | D25Vplus-Variable Flow, pump head CFV-4r 1 to 300 ml/min, 350 rpm |
1.9732.13 | D25Vplus- Variable flow, 0.2 to 300 ml/min, 110 rpm |
1.9732.14 | D25Vplus-Variable flow, 0.5 to 1000 ml/min, pump head CF-4r, 350 rpm |
1.9747.11 | D25Vplus-Peristaltic pump variable flow 0.7 to 400 ml/min, pump head 153-3r, 110 rpm |
1.9747.00 | D25Vplus-Peristaltic pump variable flow, 2.0 to 1400 ml/min, pump head 153-3r, 350 rpm |
1.9747.50 | D25Vplus - Peristaltic pump variabale flow 5 to 2000 ml/min, pump head 153-3r, 500 rpm |
1.9749.00 | D25Vplus, Peristaltic pump variable flow, 150 to 3300ml/min, pump head 253-3r. Remote control |
1.9749.50 | D25Vplus - Peristaltic pump variable flow 220 to 6000 ml/min. 253-3r pump head |
1.9747.08 | D25Vplus-Variable flow, pump head CM4-10r, remote control |
1.9747.09 | D25Vplus-Variable flow, pump head CM2-10r.Remote control |
1.0078.34 | Pump head CFV-4r for 0.5 to 4.8 mm ID tubes, 1,6 mm TW |
1.0078.43 | Pump head 153-3r, 3 rollers for tubes of 0.5 to 8.0 mm ID,1.6 mm TW |
1.0078.01 | Pump head CF-4r, 4 rollers for tubes of 0,5 to 6,4mm ID, 1,6mm TW |
1.0078.40 | Pump head 253-3r |
1.0078.42 | Pump head MC4-10r, 10 rollers |
1.0078.41 | Pump head MC2-10r, 10 rollers |
1.8760.101 | Silicone Tube 1,0mm ID+2 connectors for MC,10pcs |
1.8760.201 | Silicone tube 2,0mm ID with 2 end connectors for MC, 10pcs |
1.8760.301 | Silicone Tube 3,0mm ID with 2 end connectors for MC, 10pcs. |
1.8760.401 | Silicone Tube 4,0mm ID with 2 end connectors for MC, 10pcs |
1.8710.101 | Farmed Tube 1,0mm ID with 2 end connectors for MC, 10pcs |
1.8710.201 | Farmed Tube 2,0mm ID with 2 end connectors for MC, 10pcs |
1.8710.301 | Farmed Tube 3,0mm ID with 2 end connectors for MC, 10pcs |
1.8789.008 | Viton tube 0,8mm ID with 2 end connectors for MC, 10pcs |
1.8789.016 | Viton tube 1,6mm ID with 2 end connectors for MC, 10pcs |
1.8760.100 | Silicone tube 1,0mm ID, MC, 1 meter |
1.8760.200 | Silicone tube 2,0mm ID, MC, 1 meter |
1.8760.300 | Silicone tube 3,0mm ID, MC, 1 meter |
1.8760.400 | Silicone Tube 4,0mm ID, MC,1 meter |
1.8710.100 | Farmed Tube 1,0mm ID, MC, 1 meter |
1.8710.200 | Farmed Tube 2,0 mm ID, MC,1 meter |
1.8710.300 | Farmed Tube 3,0mm ID, MC, 1 meter |
1.8789.08 | Viton tube 0,8mm ID, MC, 1 meter |
1.8789.16 | Viton tube 1,6mm ID, MC, 1 meter |
1.9740.02 | Foot switch, for pumps D25Vplus, D25VT and D-28 |
File #84525
Brochure Peristaltic Pumps D25Vplus
Manual Peristaltic Pumps D25Vplus CFG
Manual Peristaltic Pumps D25Vplus CFV
Manual Peristaltic Pumps D25Vplus CF
Manual Peristaltic Pumps D25Vplus 9747
Manual Peristaltic Pumps D25Vplus 9749
Manual Peristaltic Pumps D25Vplus MC
Complements for Peristaltic Pumps
PHARMA tube, Chemical Compatibility
Chemical compatibility chart
EC Statement