Peristaltic Dispenser Pumps Variable Flow D25VT

Model D-25VT

Unitised  instruments contains a peristaltic pump, cyclic timer, digital  speed control, reverse and full flow  switch and remote control in a single case

Speed control 0–99% with 100% repeat accuracy

The cyclic timer permits to programme for repeat dispense operations and can be set from 0.01 seconds to 99.99 hours for dosing and interval times

Pumps accept several tube sizes and any volume dose can be programmed in each cycle of the timer

Tubing is easily removed for changeover, or autoclaving
Supplied with choice of tubing and connectors, without  foot switch

Pump Heads

All pump heads of D25VT Pumps are of easy load type with great confort when it is necessary to change continually the tubes.
Look table flows to see tubes of each pump.

The pump head CFG2-3r is a pump of 2 channels that addmit 2 tubes.

The 153-3r and 253-3r pump head support other complementary pump head and the CFV-4r with 350 rpm support 3 additonal pump heads.

The Pump wiht pump head CF-4r and CFV-4r of 4 rollers for easy load tubes that decreases the pulse of the flow. Increases the repeatability of small volume dosages

Pump Head 253-3r, recommended in very continuous operation. 
Supports tubes of 6.4 to o 9.6 mm inner diameter, with thickness wall 2,4mm.

Pump Head MC2-10r of 2 channels with 10 rollers and Pum Head MC4-10r of 4 channels with 10 rollers, can change the tubes still in operation without affecting the remaining channels.
Available pumps wiht 2 or 4 pump heads, and it is possible to get pumps to 12 channels

   Reference Flow Table Pumps D-25VT

 Code  

Head

rpm

0.5

0.8

1.6

 2.4

3.2

4.0

4.8

  6.4

 8.0

 9.6

Tube

◄ Ø mm

1.9737.05

CFG1

300

No

5.0-45

8-85

15-175

  -

35-370

50-565     

 

 

No

 

 

  

   

    No

 

Flows

ml/min

   ◄

1.9737.06

CFG2

300

0.5-5

1.0-10

5.0--45

8-85

15-175

               No

1.9732.26

CFV-4r

 30

No

0.2-2

0.6--6

1.5-15

2-20

-

3-30

 

No

 80

0.5-5

2.0-15

4.0-32

5.0-50

-

8-80

240

2.0-15

5.0-50

10-100

15-150

-

22-220

 1.9736.80

  CFV-4r

350

1.0-6.0

2.0-20

6-60

14-140

20-200

  -

30-300

1.9745.00

153-3r

350

No

2.0-20

9.0-90

15-150

30-300

-

60-650

100-1000

140-1400

1.9737.40

CF-4r

350

0.5-5

2-20

9-90

15-150

30-300

-

60-600

100-1100

No

1.9745.51

253-3r

350

 

                           No

120-2000

180-3000

250-3500

1.9770.00

253-3r

500

250-2700

350-3700

300-4700

  1.9745.08

MC4- 10r

110

 To   see

 

table 1     

 

1.9745.10

MC2- 10r

110

The flows shown are indicative and refer to water under normal conditions.(-) Undetermined flow ● Brushless motor

 Reference Flow Table by channel for pump head MC

ID tube mm

  1.0

   2.0

 3.0

   4.0

Minimum flow:                    ml / mln.

  0.6

    2

   3

   6

Maximum continuous     flow, ml/min

 6.0

   20

  30

   60

Complements for MC pump heads.

Code

                                         Article

1.8760.101

Silicone tube 1.0 mm ID with 2 end connectors for MC, 10 units

1.8760.201

Silicone tube 2.0 mm ID with 2 end connectors for MC, 10 units

1.8760.301

Silicone tube 3.0 mm ID with 2 end connectors for MC, 10 units

1.8760.401

Silicone tube 4.0 mm ID with 2 end connectors for MC, 10 units

1.8760.100

Silicone tube 1.0 mm ID, for MC, 1 meter

1.8760.200

Silicone tube 2.0 mm ID, for MC, 1 meter

1.8760.300

Silicone tube 3.0 mm ID, for MC, 1 meter

1.8760.400

Silicone tube 4.0 mm ID, for MC, 1 meter

1.8710.101

Farmed tube 1.0 mm ID with 2 end connectors for MC, 10 units

1.8710.201

Farmed tube 2.0 mm ID with 2 end connectors for MC, 10 units

1.8710.301

Farmed tube 3.0 mm ID with 2 end connectors for MC, 10 units

1.8710.100

Farmed tube 1.0 mm ID, for MC, 1 meter

1.8710.200

Farmed tube 2.0 mm ID, for MC, 1 meter

1.8710.300

Farmed tube 3.0 mm ID, for MC, 1 meter

1.8789.008

Viton ® tube 0.8 mm ID, with 2 end connectors for MC, 10 units

1.8789.016

Viton ® tube 1.6 mm ID, with 2 end connectors for MC, 10 units

1.8789.08

Viton ® tube 0.8 mm ID, for MC, 1 meter

1.8789.16

Viton ® tube 1.6 mm ID, for MC, 1 meter

1.9740.02

Foot switch, to indicate serial number pump

Size and weight pumps:

With pump head CFG1-3r, CFG2-3r, CF-4r  and CFV-4r: 320 x 260 x 140mm. 6 Kg
With pump head 153-3r, 253-3r and MC: 340 x 280 x 180mm. 7Kg.

Operation: 100...240V. 50/60Kg. Amp. 0,5 Amp.                            

Description- Accessories
1.9737.05D25VT - Variable flow 5.0 to 563ml/min.Cyclic timer/foot switch connector.CFG1-3 pump head.300rpm
1.9737.06D25VT - Variable flow 0.5 to 175ml/min.Cyclic timer/ foot switch connector.CFG2, 2 channels pump head.300rpm
1.9732.26D25VT - Variable flow 0.2 to 220ml/min.Cyclic timer/foot switch connector/CF,4 rollers pump head.30 or 81 or 240rpm
1.9736.80D25VT - Variable flow 1 to 300ml/min. Cyclic timer/foot switch connector/CFV-4rollers pump head,350rpm
1.9737.40D25VT - Variable flow 2.0 to 1100ml/min Cyclic timer/foot switch connector. CF,4 rollers pump head.350rpm
1.9745.00D25VT - Variable flow 9 to 1400ml/min.Cyclic timer/foot switch connectort.153-3r pump head,350rpm
1.9745.51D25VT - Variable flow 120 to 3500ml/min,.Cyclic timer/foot switch connector.253,3r pump head.350rpm
1.9770.00D25VT - Variable flow,150 to 4700ml/min.Cyclic timer/foot switch connector.Pump head 253-3r.500rpm
1.9745.10D25VT - Variable flow 0.8 to 50ml/min.Cyclic timer/foot switch connector.MC2-10r pump head,2 channels
1.9745.08D25VT - Variable flow, 0.8 to 50ml/min. Cyclic timer/foot switch connector.MC4-10r of 4 channels pump head
1.0078.34Pump head CFV-4r for 0.5 to 4.8 mm ID tubes, 1,6 mm TW
1.0078.01Pump head CF-4r, 4 rollers for tubes of 0,5 to 6,4mm ID, 1,6mm TW
1.0078.43Pump head 153-3r, 3 rollers for tubes of 0.5 to 8.0 mm ID,1.6 mm TW
1.0078.40Pump head 253-3r
1.0078.41Pump head MC2-10r, 10 rollers
1.0078.42Pump head MC4-10r, 10 rollers
1.8760.100Silicone tube 1,0mm ID, MC, 1 meter
1.8760.300Silicone tube 3,0mm ID, MC, 1 meter
1.8760.200Silicone tube 2,0mm ID, MC, 1 meter
1.8760.400Silicone Tube 4,0mm ID, MC,1 meter
1.8760.101Silicone Tube 1,0mm ID+2 connectors for MC,10pcs
1.8760.201Silicone tube 2,0mm ID with 2 end connectors for MC, 10pcs
1.8760.301Silicone Tube 3,0mm ID with 2 end connectors for MC, 10pcs.
1.8760.401Silicone Tube 4,0mm ID with 2 end connectors for MC, 10pcs
1.8710.100Farmed Tube 1,0mm ID, MC, 1 meter
1.8710.200Farmed Tube 2,0 mm ID, MC,1 meter
1.8710.300Farmed Tube 3,0mm ID, MC, 1 meter
1.8710.101Farmed Tube 1,0mm ID with 2 end connectors for MC, 10pcs
1.8710.201Farmed Tube 2,0mm ID with 2 end connectors for MC, 10pcs
1.8710.301Farmed Tube 3,0mm ID with 2 end connectors for MC, 10pcs
1.9740.02Foot switch, for pumps D25Vplus, D25VT and D-28