Bombas Peristálticas Caudal Variable D25Vplus
Peristaltic Pumps Variable Flows Model D-25Vplus
Automatic cyclic dose with programming time of dosing and rest between 1 and 99 seconds
Auxiliary remote control by signal 0-10 V and 4-20 mA
Connector for foot switch ON/OFF
Display indicator
Full flow switch for charge o remove fluid
General switch ON/OFF
Many lot of pump heads and motors for flows from 0.02 to 6000 ml/minute
Metallic rotor of 3 rollers
Non-volatile memory
Ramp function, flow / time 0...99% / 1...99 minutes
Reverse flow
Speed control 0 to 99 % in 1% increments
Speed repeat accuracy 100 %
Tube is easily removed by user
Warning pilot lamps
Water proof key board
PUMP HEADS
Pump head 50-3r, 3 rollers, for medium and low flow. Transparent cover. Can load tubes to 6.4mm diameter.
Pump head CFV-4r, easy cahnge tube with 4 rollers for 0,5 tubes to 4,8mm. Motor from 15 to 240rpm
Pump head 153-3r, and CFV-4r (330rpm), for extreme easiness to remove tubes. The 153-3r can use tubes from 0,5 to to 8mm diameter and can load another auxiliary 153-3r pump head simultaneously.
The pump head CFV-4r(330rpm) can loa, maximum, 4 auxiliary pump head.
Pump head CF-4r of 4 rollers, extreme easiness to remove tubes. Can use tube from 0,5 to 6,4mm.
Pump head 253-3r, of 3 staintless steell rollers, for continuous work. Can load tubes from 6,4 to 9.6mm. of tickness wall 2,4mm
Pump head M4-10r of 4 channels with 4 bobines and 10 driver rollers.
Pump head M2-10r of 2 channels with 2 bobines and 10 driver rollers.
The pumps MC can load auxilliary MC pump heads with maximum 12 channels.
Each pump is supplied with a set of tubes
Size: L x D x H
Pumps with pump head 50-3r and CFV-4r:250 x 260 x 120 mm. Weight: 4.2 Kg
Pumps with pump head CF-4r, 153-3r / 253-3r / MC and CFV-4r with 330rpm motor: 340 x 280 x180 mm. Weight: 7 Kg.
Operate: 100...260 V 50/60 Hz.
Specifications - Flow Table
Orientative table flows - Regulation Intervals for each tube diameter
Código |
rpm |
Head |
0,5mm |
0,8mm |
1,6mm |
3,2mm |
4,0mm |
4,8mm |
6,4mm |
8,0mm |
9,6mm |
Tube Ø |
1.9731.15 |
15 |
CFV-4r |
0,02-0,30 |
0,05-0,80 |
0,2-3,0 |
0,8-12 |
1,25-18 |
1,5-25 |
No
|
Caudal ml/min |
||
1.9731.30 |
30 |
CFV-4r |
0,03-0,5 |
0,07-1,20 |
0,3-4,6 |
1,2-18 |
1,8-29 |
2,2-30 |
||||
1.9731.80 |
80 |
CFV-4r |
0,08-1,2 |
0,20-3,00 |
0,8-12 |
3,0-48 |
4,5-78 |
5,0-85 |
||||
1.9731.24 |
240 |
CFV-4r |
0,25-3,0 |
0,80-8,0 |
3,0-30 |
11-122 |
18-192 |
25-250 |
||||
1.9731.33 |
330 |
CFV-4r |
0,5-5,0 |
0,8-12,0 |
3,3-50 |
13-205 |
20-320 |
25-330 |
||||
1.9735.00 |
240 |
50-3r |
0,60-5,2 |
1,5-16 |
5,6-65 |
25-225 |
35-283 |
70-400 |
130-700 |
No |
||
1.9735.15 |
80 |
50-3r |
0,15-2,2 |
0,40-5,6 |
1,3-24 |
3,8-73 |
5,9-114 |
8,9-145 |
16-258 |
|||
1.9735.12 |
30 |
50-3r |
0,05-0,8 |
0,13-2,0 |
0,6-7,5 |
1,5-23 |
2,1-35 |
3,2-45 |
5,7-81 |
|||
1.9747.50● |
500 |
153-3r |
0,7-12 |
2-29 |
12-120 |
29-470 |
- |
80-1000 |
115-1500 |
250-2000 |
No |
|
1.9747.00 |
330 |
153-3r |
0,5-8,5 |
1,5-20 |
8,0-85 |
20-330 |
- |
56-700 |
80-1050 |
175-1300 |
No |
|
1.9747.11 |
110 |
153-3r |
0,17-2,8 |
0,5-6,7 |
2,7-28 |
6,7-100 |
- |
19-230 |
27-367 |
58-500 |
||
1.9747.40 |
330 |
CF-4r |
0,5-8,5 |
1,5-20 |
8,0-85 |
20-330 |
- |
56-700 |
80-1050 |
No |
||
1.9749.50● |
500 |
253-3r* |
No |
220-2700 |
320-4700 |
450-6000 |
||||||
1.9749.00 |
330 |
253-3r* |
No |
150-1850 |
200-2970 |
250-3300 |
||||||
1.9747.09 |
110 |
MC2 |
(1) |
|
||||||||
1.9747.08 |
110 |
MC4 |
(1) |
|
● Motor brushless - * For tickness wall tube-(1)To sse below flow table
Orientative table flows for each channel - Pump head type MC.
Inside diameter tube mm |
1,0 |
2,0 |
3,0(1) |
4,0 |
Minimum flow: ml / min |
0,8 |
2,5 |
4,0 |
5 |
Continuous máximum flow, ml/min |
8 |
25 |
40 |
50 |
Flows calculated with water in normal conditions without outlet back pressure.
1.9735.12 | D25Vplus-Peristaltic pump variable flow, 0.05 to 81ml/min, 3 rollers, 30rpm |
---|---|
1.9735.15 | D25Vplus-Peristaltic pump variable flow, 0.4 to 258ml/min 3 rollers, 80rpm |
1.9735.00 | D25Vplus-Peristaltic pump variable flow, 0.6 to 700ml/min 3 rollers, 240rpm |
1.9731.15 | D25Vplus Vafiable flow,pump head CFV-4r, 0,02 to 25ml/min.15rpm.Remote control |
1.9731.30 | D25Vplus-Variable flow, pump head CFV-4r, 0,03 to 30ml/min,30rpm.Remote Control |
1.9731.80 | D25Vplus-Variable flow, pump head CFV-4r,0,08 to 85 ml/min, 80rpm.Remote control |
1.9731.24 | D25Vplus-Variable flow,pump head CFV-4r, 0,25 to 250ml/min, 240rpm.Remote control |
1.9731.33 | D25Vplus-Varibale Flow, pump head CFV-4r 0,5 to 330ml/min,330rpm.Remote control |
1.0078.34 | Pump head CFV-4r for 0,5 to 4,8mm ID tubes, 1,6mm TW |
1.9747.11 | D25Vplus-Peristaltic pump variable flow 0.14 to 500ml/min, 153, 3 rollers pump head, 110rpm |
1.9747.00 | D25Vplus-Peristaltic pump variable flow, 0.5 to 1300ml/min. 153-3 rollers pump head, 330rpm |
1.9747.50 | D-25Vplus - Peristaltic pump variabale flow 0,7 to 2000ml/min 153-3r pump head |
1.0078.43 | Pump head 153-3r, 3 rollers for tubes of 0,5 to 8,00mm ID, 1,6mm TW |
1.9747.40 | D25Vplus-Variable flow, pump head CF-4r, 0,5 -1100ml/min. Remote control |
1.0078.01 | Pump head CF-4r, 4 rollers for tubes of 0,5 to 6,4mm ID, 1,6mm TW |
1.9749.00 | D25Vplus, Peristaltic pump variable flow, 150 to 3300ml/min, pump head 253-3r. Remote control |
1.9749.50 | D-25Vplus - Peristaltic pump variable flow 220 to 6000 ml/min. 253-3r pump head |
1.0078.40 | Pump head 253-3r |
1.9747.08 | D25Vplus-Variable flow, pump head CM4-10r, remote control |
1.0078.42 | Pump head MC4-10r, 10 rollers |
1.9747.09 | D25Vplus-Variable flow, pump head CM2-10r.Remote control |
1.0078.41 | Pump head MC2-10r, 10 rollers |
1.8760.101 | Silicone Tube 1,0mm ID with 2 end connectors for MC, 10pcs |
1.8760.201 | Silicone tube 2,0mm ID with 2 end connectors for MC, 10pcs |
1.8760.301 | Silicone Tube 3,0mm ID with 2 end connectors for MC, 10pcs. |
1.8760.401 | Silicone Tube 4,0mm ID with 2 end connectors for MC, 10pcs |
1.8760.100 | Silicone tube 1,0mm ID, MC, 1 meter |
1.8760.200 | Silicone tube 2,0mm ID, MC, 1 meter |
1.8760.300 | Silicone tube 3,0mm ID, MC, 1 meter |
1.8760.400 | Silicone Tube 4,0mm ID, MC,1 meter |
1.8710.101 | Farmed Tube 1,0mm ID with 2 end connectors for MC, 10pcs |
1.8710.201 | Farmed Tube 2,0mm ID with 2 end connectors for MC, 10pcs |
1.8710.301 | Farmed Tube 3,0mm ID with 2 end connectors for MC, 10pcs |
1.8710.100 | Farmed Tube 1,0mm ID, MC, 1 meter |
1.8710.200 | Farmed Tube 2,0 mm ID, MC,1 meter |
1.8710.300 | Farmed Tube 3,0mm ID, MC, 1 meter |
1.9740.01 | Foot Switch for Pumps D-21V |
1.9740.02 | Foot switch, for pumps D25Vplus, D25VT and D-28 |
1.8789.08 | Viton tube 0,8mm ID, MC, 1 meter |
1.8789.16 | Viton tube 1,6mm ID, MC, 1 meter |
1.8789.008 | Viton tube 0,8mm ID with 2 end connectors for MC, 10pcs |
1.8789.016 | Viton tube 1,6mm ID with 2 end connectors for MC, 10pcs |
- Brochure Peristaltic Pumps D25Vplus
- Manual Peristaltic Pumps D25Vplus 50
- Manual Peristaltic Pumps D25Vplus CFV
- Manual Peristaltic Pumps D25Vplus 9747
- Manual Peristaltic Pump D25Vplus 9747.40
- Manual Peristaltic Pumps D25Vplus 9749
- Manual Peristaltic Pumps D25Vplus MC
- Accessories for Peristaltic Pumps
- PHARMA tube, Chemical Compatibility
- Chemical compatibility chart
- CE Statement - Pumps- Only available to registered users